BPS C-100 CPAP Guía de usuario descargar pdf (Pagina 6)

The C-100 Battery Pack is compatible with most makes and models of PAP

devices; however, some devices will require the use of a power converter

or power inverter in conjunction with the Battery Pack.

The components included with the Battery Pack kit may not be compatible

with your PAP device as some manufacturers require the use of a specific

DC cable with built-in fuses or other special connection types. When in

doubt, please contact the manufacturer of your device.

Compatibility

ResMed Device Warning

If you are using any device manufactured by ResMed you must use

either a power converter or power inverter to complete the connection

between the device and the C-100 Battery Pack as newer ResMed devices

operate from a 24V direct current and the input plugs on older ResMed

devices run opposite polarity from other manufacturer devices.

DO NOT connect the Battery Pack directly to any ResMed model

device as doing so will damage the ResMed device. See pages 15-16

for connection instructions.

Intended Use

The C-100 Battery Pack is intended to provide external battery power to

PAP (positive airway pressure) devices.

The Battery Pack may also be used to power other small electronic

devices such as smartphones, iPods, laptops, and iPads (use of a sine

wave power inverter may be required). See page 19 for more information.

Please note that use of the C-100 Battery Pack with a device that requires

higher amperage requirements (over 8A) may cause the internal circuitry

of the Battery Pack to shut off to protect from overrun.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Sin comentarios

BPS C-100 CPAP Guía de usuario Pagina 6